JAL-OAGH: Wafer and Threaded Type Electromagnetic Flow Meters

Manas has introduced a new economical series of Electromagnetic Flow Meter, considering water as the most important utility in Industry.

JAL-OAGH 100, 300 SERIES OF ELECTROMAGNETIC FLOW METER

These Flow Meters are dedicated for waste water management system, sewage & effluent water measurement. These Flow Meters are mainly categorized int two i.e Threaded and Wafer type. Threaded is available from DN25 to DN65 i.e JAL-OAGH 100 Series while Wafer is available from DN 50 to DN 200 i.e JAL-OAGH 300 Series. 

Key Features of Wafer Type Electromagnetic Flow Meters:

• Most suitable full bore electromagnetic flow meters for water and waste water treatment plants.
• Economically Priced, Wafer Style Meter.
• Available from DN50 to DN200.
• Small in size and light in weight compared to other meters in its class.
• Typical accuracy; better than 0.5% of reading.
• Suitable for Raw water;Waste water; Sewage Water; Effluent water.
• Available with Ebonite Hard Rubber as well as PTFE Liners.

• 
  

SEND ENQUIRY

SG-SROAT: Sanitary Grade Electromagnetic Flow Meter

The Series SG-Sroat of Electromagnetic Flow Meters are specifically designed for measuremet of food grade liquids like milk, cream juices of various fruits, pharma liquids etc. It is available with integral or remote version of transmitter. The transmitter can have built in or remote totalizer display. Suitable End connections like SMS Union, DIN Union or Ti-clover Clamp is given as pers customer's requirement. 

Special models are available for mounting on milk tankers.

Key Features of Sanitary Grade Electromagnetic Flow Meter:

• Full stainless steel construction with PTFE Liner.
• The transmitter can have built-in or remote totaliser display.
• Suitable for any type of Dairy Fluids like milk, cream etc,Also suitable for Pharma liquids, juices of various fruits.
• Available in two types of end connections;SMS or DIN Union and Tri-Clover clamps.
• Sizes available from DN25 to DN100. Lower Sizes on Request.
• Highly Accurate and Linear.
• Isolated Analog and digital Output.

SEND ENQUIRY

SROAT 1000i - Insertion Type Electromagnetic Flow Meter

The Manas make Insertion type Electromagnetic Flow Meter, called SROAT-1000i is an ideal solution for water flow measurement in large diameter pipes. Fairly good accuracy of measurement(typical 1% of flow rate) can be achieved with little care in installation of probe and transmitter. The electric conductivity of liquid under measurement can be as low as 20 microsiemens /cm. Being insertion type there is virtually no pressure loss. Most economical as compared to its counterpart in full bore measurement or ultrasonic measurement. 

Key Features of SROAT 1000i - Insertion Type Electromagnetic Flow Meter:

• Available for different line sizes from 200 mm to 2000 mm.
• Typical accuracy of ± 1% (Best accuracy in it’s class)Measurement results are independent of density, viscosity ,Pressure, temperature, solid impurities & conductivityVariations (above 5 µS/cm).
• Excellent long term stability using pulsed DC magnetization& auto zero technique.
• Best suited for irrigation and water supply departments,public service and utility departments.

                       

SEND ENQUIRY

MEGA SROAT- Large Sized Electromagnetic Flow Meter

MEGA SROAT series is offering is offering large sized electromagnetic flow meters introduced by manas. The sizing ranges from 400mm diameter to 1600mm diameter. These flow meters are very accurate(Typically 0.5% of actual flow rate). Hard ebonite rubber lining makes these meters suitable for measurement of Raw water containing even abrasive sand and quartz practicles, mud etc. and still delivering long life. This series is also suitable for sewage application. 

Key Features of MEGA SROAT- Large Sized Electromagnetic Flow Meter:

• Diameters available from DN400 to DN1000.(Higher Diameters on request)
• Extremely suitable for very high flow rate, accurate water metering.
• Available in Ebonite lining. Polyurethane on request possible.
• High accuracy of measurement like 0.5%. of Reading.

SEND ENQUIRY

MAGMETER Sroat-1000 Electromagnetic Flow Meter

The Manas Make electromagnetic flow meter called as SROAT-1000  virtually approaches the ideal flow meter suitable for wide range of liquid flow measurements even with very low conductivities. The meter offers no resistance to flow hence the pressure drop is almost negligible. The measurement being based on Faraday's law of electromagnetic induction, is independent of visocity, density, pressure & temperature of flowing medium. The measurement is not affected by solid impurities as long as the min. conductivity of 5µs/cm is available. It is a true volumetric flow measurement.We offer variousmaterials of construction for meter lining & electrodes to cover majority of corrosive liquids.  

Key Features of MAGMETER Sroat-1000 Electromagnetic Flow Meter:

• Sizes ranging from DN 10 – DN 1000  
• Wide choices of compatible electrodes, liners & Body materials
• Pulse & Isolated 4-20 mA output
• Empty tube detection possible
• Accuracy ±0.5% of actual flow rate
• 5000 / 10000 Number of readings can be logged
• Four Numbers of Keys for Parameter Programming
• Computer/Printer Interfacing with RS 232 port
• Empty Tube Detection and Indication
• Suitable to conductive liquids ? 5 µs/cm
• Stored/Online data can be stored in excel format (applicable for SS-2000)
• Online data can be transferred by using GSM modem (applicable for SS-2000)

SEND ENQUIRY

Smart Sroat SS1002 Electromagnetic Flow Meter

Manas have now introduced a new type of primary flow sensor & smart flow transmitter in their electromagnetic flow meter series.

Key Features of SS1002 Electromagnetic Flow meter:

• Wide range of sizing DN10 to DN350.
• Higher sizes are also available but Model is Mega-Sroat (Diameter DN400 to DN1600)
• Accuracy ±0.5% of actual flow rate between 100% to 10% off calibrated range.
• Wide choices of compatible electrodes, liners & Body materials.
• 5000 / 10000 Number of readings can be logged.
• Computer/Printer Interfacing with RS 232 / RS485 port.
• Stored/ Online data can be store in excel format file by using RS232 Monitor Software PC end.

SEND ENQUIRY

Electromagnetic Flow meters

Manas Make Volumetric flow meters works on the Faraday's law of Electromagnetic induction. The measurement is independent of Viscosity, Density, Dissolved/ Undissolved solids  pressure or temperature of the fluid liquid as long as it maintains certain minimum conductivity. 

Principle of operation: 

When a conductor moves within a magnetic field, voltage is induced in it which is proportional to the velocity of the conductor.

In this case the conductor is flowing media. The equation is as below,

E= B.V.D

Where,

E= Induced voltage (proportional to velocity)

B= Magnetic flux density

V= Mean velocity of the media

D= Diameter of the flow element (distance between the sensing electrodes)

SEND ENQUIRY